According to the shortest design, high-performance, active protection, the possibility of deep shallow and superficial is a strong argument that convinces to work with our unit.
COMPONENTS OF THE WORK PROGRAM
Claws abstract in three sections of the blades on both sides and the long odkładnie tuned at a right angle to the substrate in two rows will achieve a uniform and intense mixture of crop residues. Having the ability to work well after removing the plow, reach greater depths of work. With the right distance combination between the beams and ground clearance on the ground get a quality work in all conditions.
FREE MAINTENANCE OVERLOAD PROTECTION
Non-stop. In these words is contained the whole philosophy is based on an effective protection of work elements combined with comfort controls, does not require the intervention of the frequent operator. For each type of soil, conditions or stony fields niezakamienionych little, the most effective solution is used by the safety system that arise from the blade. Each tooth reacts independently of the obstacles, and the spring minimizes the forces exerted during a collision and quick return to a predefined component precisely working position. Each spring forms a spring steel plunger responsible for maintaining the clutch position and its deflection in the case of driving the grille force higher than the set screws in the setting. Efficient and simple.
The effect of better alignment of the cultivated belt is made possible by the spring steel working strips. Flexible and effective. Especially in light soils with small amounts of crop residues.
The best leveling and compaction of the soil reaches the axis of choice between a wide range of axes that it replaces, suitable for different soil conditions. Useful in this standard will be axes and their parameters contained in the “AXES”. The shaft but the properties resulting from its construction has another important function – in the arms of the axis the work depth is controlled.
Comfort, DEPTH ADJUSTMENT
The locking pins of the rear position of the arm shaft, because they regulate the working depth of the machine can be adapted at any time in the support system of the hydraulic cylinders. In this version of the machine to adjust the working depth of a convenient way to control the hydraulic system from the cab of the tractor.
A – basic equipment:
Spring or hydraulic protection
Three rows of 60 x 25 mm teeth
Of compensation Government springs 60 x 10 mm
Work plate and deep
Drive means for operating the depth with a width of 40 mm or working shallow podcinaczami with a width of 80 mm podcinaczami.
B1 – Equipment required:
Axis (list available in the Waly tab)
C – Options:
Hydraulic control shaft